ECUMaster

Ah i might have solved part of the issue shifter + maxxecu wants to read ID 1560… (hex618) and thats why its overlapping and shifter stops working.

This is what ive setup in ecumaster all other work but i need to get wheelspeed to ecumaster in order to send it to ofgear as far as i see it should be 1:1 to maxxecu and all these values show correctly in ofgear display

Got the overlapping messages solved, on the photo there is the DLC "6", it was setup as picture shows, but for some odd reason of ecumaster... it didnt send the correct setting and there was 8 instead of 6... and 8 means its sending 00 00 values on the last 2 bytes.. which then means overlapping messages with shifter..

so now ecumaster + shifter is talking. now i need to steal speed signal from somewhere to ecumaster (sending it im sure is straight forward with the messages that is already setup but getting the speed to ecu is bit more tricky)

this is once again my opinion, the Canbus speed should be "valued" as External speed if its present and primarly use the internal speed? <- and this was the idea of my previous discussion on the canbus speed...

ECUMaster ADU